Utility Bill Savings: Weatherproof, Restore & Remodel


Saving Money by Keeping Your Home Up-to-Date

If it seems like your utility bills keep rising, odds are that it’s not just because the utility companies have raised their rates. It’s far more likely that much of the conditioned air that your heating and cooling system generates is escaping through tiny cracks and crevices–and that outside air is likewise seeping in. Weatherproofing doors and windows makes a massive difference to your home energy efficiency; just one of many small projects you can use to save on utility bills in the future.
Top Tips for Saving on Utilities

  • Weatherproof All Entry Doors – When you stand near an entry door in your home on a cold day, do you feel cold air? If so, it’s time to update the weatherproofing. Use caulk to seal gaps around the frame; for large gaps, cut a backer rod to size to fill the space, and then add caulk to hold it in place. Remove and replace any old weather-stripping.
  • Buy a Programmable Thermostat – If you aren’t already using a programmable thermostat, it’s time to get moving. A programmable thermostat will let you regulate the temperature in your home, and some will even allow you to regulate each room. Being in control of how and when your system turns on can save you a bundle by not heating rooms that are not in use.
  • Switch to LEDs – Like most homeowners, you probably swapped out your incandescent light-bulbs for CFLs years ago. LED bulbs provideĀ even more savings than CFLs, and they last considerably longer too. Best of all, they have become very affordable. A standard incandescent bulb lasts around 1,200 hours. Over the course of 23 years, it costs about $201 to operate. Meanwhile, an LED offers more than 25,000 hours of operation time, and it costs around $30 over the course of 23 years.
  • Adjust Your Water Heater – In most homes, the water heater is the third most expensive component to operate. You can slash your costs considerably by setting the temperature to 120 degrees, which is more than warm enough for a nice shower. If possible, you might even switch to a tank-less water heater, which offers exceptional efficiency by only heating water as-needed.
  • Upgrade Insulation – Finally, even the best insulation degrades over time. What was top of the line a few years ago is probably middle of the road now. With these points in mind, consider swapping out the insulation in your home to improve its energy efficiency. This is especially important in the attic, but it should be done throughout the home for optimal results.

Most of these tips can easily be handled by an everyday homeowner. However, if you really want to slash utility costs while making your home as energy efficient as possible, major improvements may be in order. In northeast Indiana, Paul David Restoration can help. Contact us today for a consultation.